The use of the hood does not require any special training, after tearing the protection bag /place of tearing is shown on the bag / the hood has to be pulled on the head, the half mask is to be adjusted to the face by pulling simultaneously the two head-bands equipped with quick-closing. Way of usage is shown by pictographs on the packing.
Limits of use:
- The Escape Hoods cannot be used when the oxygen content in the ambient air is less than 17%, which is often the case in closed spaces such as wells, tunnels, cisterns, etc.
- By increasing the concentration the efficiency of protection decreases rapidly.
- The Escape Hoods are single use products, it is forbidden to repair or repeatedly use.
5 years, only for undamaged, intact, originally packed hoods.
Escape Hood ABEK1P3
The Escape Hood is intended for the population to escape from contaminated areas in case of chemical accidents and catastrophes. The hood provides protection: at a concentration of 1000 ppm against vapors of organic solvents, inorganic gases and vapors, acid gases and vapors, ammonia according to EN 14387. The Escape Hood does not have protection against carbon monoxide /CO/!!
Device class: „S”
Protection /breakthrough/ time: at a concentration of 1000 ppm against cyclohexane, sulphur hydrogen, chlorine, hydrogen cyanide, ammonia, sulphurdioxide according to EN 141 Standard /DIN EN 14387:2008/. Particle filtering efficiency: protection capacity against solid and liquid aerosols meets requirements of P3 class of DIN EN 143:2007 standard. The product is CE certified, tested by the German BGIA on basis of DIN 58647-7:1997, ABEK P15.
Individual packing, sealed, aluminum foil welded bag in a portable carton box with pictographs on it for use. Groupie: 20 pcs small box.
Escape Hood COP3
The Smoke Hood is filtering device with hood for single use only and for short duration, minimum 15 minutes, for self rescue in case of fire. It serves for personal escape from particulate matter, carbon monoxide and other toxic gases produced by fire. Designed to be carried on the person in a shoulder bag, the filter is not replaceable by the user.
Device class: "M"
Certified according to DIN EN 403:2007 and complies with the provisions laid down in the directive 89/686/EEC (Personal Protective Equipment), amended by the directives 93/68/EEC, 93/95/EEC and 96/58/EC.
The filtering smoke hood is welded into an aluminum foil bag and packed into the shoulder bag with Use for Instruction.